HQ-TC-95-HT     Twin Cam 95 Heavy Touring 9.5:1 compression ratio

The following is a complete list of everything required to build the Head Quarters Twin Cam 95 Heavy Touring performance package.

    Qty  Part #                         Description

                                                HEAD WORK
    1)  HVP-TC                          Your heads completely reworked, ready to bolt back on.
         HVP-TC-MCR                  (as above with mechanical compression releases installed)
         HVP-TC-ECR                   (machined for HD electronic compression releases. not supplied)
    2) HQ-4527                       Gaskets, head, .027" thick MLS type
    1)  HQ-HEAD-BOARD    Fin Protector (heads bolted to this for shipping)

                                                CYLINDER WORK
    1)  HQ-7100-I                     Bore stock (3.750") TC cylinders to 3.875"
    1)  HQ-CYL-BOARD        Fin Protector (cylinders bolted to this for shipping)
    1)  CP-M5070                    Pistons, flat topped forged

                                               RECOMMENDED PARTS
    1) HQ-4055                       Pushrods, adjustable EZ install type
    4)  HQ-4225                       Hydraulic lifters, Black Ops type
    1) 17033-99                       James rocker cover gasket and seal set

                                       Cam Choices as per drive type and year.

    1)  HQ-TC-575                      Cam, chain drive 1999-06 models (except 2006 Dyna)


    1)  HQ-TC-575-G             Cam, gear drive 1999-06 models (except 2006 Dyna)
    1)  AP-288901                  Kit, gear drive install
    1)  AP-288908                  Kit, gear drive, 1999-06 (except ‘06 Dyna)

                                        Additional options for carburetor equipped models

    1) HQ-7025-A                  Port, intake manifold (send us your manifold)
    1)  HQ-6100                      Ignition, preprogrammed for 1999-03 models
    1)  HQ-6104                        Ignition, preprogrammed for 2004 & later

                                                Optional Parts (not required)
    1) HQ-32679                      Show off your build with a Head Quarters timing cover
    1)  HQ-4600                       Roller Rockers


If you want this job done you will need to print a work order to send along so we know exactly what you need.
Click the red link below to find a work order for this build and print it off.
HC-TC-95-HT work order

You can price any part or the whole job by viewing or printing off a price sheet found on the red link below.