HQ-SE-110-ST      Twin Cam 110 Sport Touring 10.5:1 compression ratio

The following is a complete list of parts and labor required to build the Head Quarters Twin Cam SE-110 Sport Touring performance package.

SPECIAL NOTE: We do not work on SE heads. STOCK type Twin Cam heads must be supplied or we can provide cores. Cylinder boring and pistons are not required.

Qty  Part #                         Description

                                             HEAD WORK
1)  HQK-L-TC/EV-S3      (all cylinder head labor, porting, radiused valve job, chamber blend & decking)
1)  HQK-P-TC/EV-S3       (all new parts in cylinder heads, valves, guides, seals, spring assemblies)
1)  HQ-7000-E                   glassbead carbon out of heads
1) HQ-7008-B                   Machine 2 decompression holes
1)  HQ-3600                       Decompression valves (2) AKA compression releases
1)  HQ-HEAD-BOARD    Fin Protector (heads bolted to this for shipping)

                                               CYLINDER WORK
1)  HQ-7100-C                   Bore  (4.000") TC cylinders to 4.010"
1) HQ-7102-C                   Glassbead carbon off tops of cylinders
1)  HQ-8-65375                  Pistons, forged dished top to match stock chamber

                                               RECOMMENDED PARTS
1) HQ-4055                       Pushrods, adjustable EZ install type
1)  HQ-4075                      Covers, used with EZ install pushrods for more adjustment room
4)  HQ-4225                       Hydraulic lifters, Black Ops type
1) 17033-99                       James rocker cover gasket and seal set

                                   Cam Choices as per drive type and appropriate year

1)  HQ-TC-575                      Cam, chain drive 1999-06 models (except 2006 Dyna)

                                                                        OR

1) HQ-TC-575-G             Cam, gear drive 1999-06 models (except 2006 Dyna)
1)  AP-288901                  Kit, gear drive install
1)  AP-288908                  Kit, gear drive, 1999-06 (except ‘06 Dyna)

                                                                       OR

1) HQ-TC-575-HC         Cam, for all 2007-’09 models including ‘06 Dyna

                                    Additional parts for carburetor equipped models

1) HQ-7025-A                  Port, intake manifold (sens us your manifold)
1)  HQ-2525                      Jet Kit, for CV40 includes jets and needle
1)  HQ-6100                     Ignition, preprogrammed for 1999-03 models
                                                                       OR
1) HQ-6104                        Ignition, preprogrammed for 2004 & later

                                               Additional parts for EFI models

  Additional parts for EFI models

1)  HQ-6500                     Pro Tuner, 2002-early ‘05 models and ‘01 Softail
                                                                       OR
1)  HQ-6505                      Pro Tuner, 2005 -06 Softail, FLT & FLH and late ‘05 Dyna
                                                                        OR
1)  HQ-6515                      Pro Tuner, 2006 - ‘08  all models except ‘08 FLs (fly by wire)
                                                                        OR
1)  HQ-6520                      Pro Tuner, 2008   FL models (fly by wire)

                                                       Optional Parts (not required)
1) HQ-32679                      Show off your build with a Head Quarters timing cover
1)  HQ-4600                       Roller Rockers
 

If you want this job done you will need to print a work order to send along with the job. Even if you are not sending in work but want to buy our cores, you still need to supply a work order so we know what you need.
Click the link below to find this build and print it off
Click here for shortcut to PDF page
Click the link above to find pricing
Dealers email tech@head-quarters.com for confidential pricing.